To optimize fuel consumption using the fuel saver device, it needs to be connected to the OBD-II port, typically found under the dashboard on the driver's side. This port allows the device to access and analyse data from the engine control unit (ECU) and make adjustments accordingly.
Free Delivery
Worldwide Free Shipping
Free Support
24/7 Help Desk
Safe & Secure
World's most secure payment methods
+120.000 satisfied customers
Best 5-star rated fuel saver.
Benefits of Fuel Save Pro
Free Delivery
Worldwide Free Shipping
Free Support
24/7 Help Desk
Safe & Secure
World's most secure payment methods
+120.000 Satisfied Customers
Best 5-star rated fuel saver.
COMBO WINTER ❄️ SALE UP TO 50% OFF - Don’t miss out
00Days
00Hours
00Mins
00Secs
Benefits of Fuel Save Pro
Free Delivery
Worldwide Free Shipping
Free Support
24/7 Help Desk
Safe & Secure
World's most secure payment methods
+120.000 Satisfied Customers
Best 5-star rated fuel saver.
COMBO SPRING 🌷 SALE UP TO 65% OFF - Don’t miss out
00Days
00Hours
00Mins
00Secs
Benefits of Fuel Save Pro
AI Adaptable Configuration
Following installation, Fuel Save Pro requires approximately 150 miles of operation in order to become familiar with the characteristics and driving style of your vehicle, thereby allowing it to optimize fuel efficiency without sacrificing throttle response
100% Compatibility
Fuel Save Pro is designed to interface directly with your vehicle's engine control unit via the OBD-II port, which is standard on all vehicles manufactured in the United States since 1996. As such, any car produced after 1996 should be compatible with Fuel Save Pro.
Improved Performance
The Fuel Save Pro device improves the overall performance of your car through the modification of various engine control unit settings, including boost pressure, injection timings, and fuel injection. These adjustments result in a more efficient system that conserves fuel while preserving the other dynamic features of your vehicle.
It doesn't affect your Engine
Our product operates within the bounds of the engine's tolerance and does not make any permanent changes to the engine control unit. Upon disconnection of Fuel Save Pro, the original factory settings are restored.
No throttle loss
Fuel Saver actually enhances throttle response by adjusting various parameters within the car's system. This allows the vehicle to maintain or even increase torque output while simultaneously reducing fuel consumption.
No power compromises
The Fuel Saver operates with minimal power consumption, thus posing no risk to the battery of your vehicle.
AI Adaptable Configuration
Following installation, Fuel Save Pro requires approximately 150 miles of operation in order to become familiar with the characteristics and driving style of your vehicle, thereby allowing it to optimize fuel efficiency without sacrificing throttle response.
100% Compatibility
Fuel Save Pro is designed to interface directly with your vehicle's engine control unit via the OBD-II port, which is standard on all vehicles manufactured in the United States since 1996. As such, any car produced after 1996 should be compatible with Fuel Save Pro.
Improved Performance
The Fuel Save Pro device improves the overall performance of your car through the modification of various engine control unit settings, including boost pressure, injection timings, and fuel injection. These adjustments result in a more efficient system that conserves fuel while preserving the other dynamic features of your vehicle.
No throttle loss
Fuel Saver actually enhances throttle response by adjusting various parameters within the car's system. This allows the vehicle to maintain or even increase torque output while simultaneously reducing fuel consumption.
It doesn't affect your Engine
Our product operates within the bounds of the engine's tolerance and does not make any permanent changes to the engine control unit. Upon disconnection of Fuel Save Pro, the original factory settings are restored.
No power compromises
The Fuel Saver operates with minimal power consumption, thus posing no risk to the battery of your vehicle.
AI Adaptable Configuration
Following installation, Fuel Save Pro requires approximately 150 miles of operation in order to become familiar with the characteristics and driving style of your vehicle, thereby allowing it to optimize fuel efficiency without sacrificing throttle response
100% Compatibility
Fuel Save Pro is designed to interface directly with your vehicle's engine control unit via the OBD-II port, which is standard on all vehicles manufactured in the United States since 1996. As such, any car produced after 1996 should be compatible with Fuel Save Pro.
Improved Performance
The Fuel Save Pro device improves the overall performance of your car through the modification of various engine control unit settings, including boost pressure, injection timings, and fuel injection. These adjustments result in a more efficient system that conserves fuel while preserving the other dynamic features of your vehicle.
No power compromises
The Fuel Saver operates with minimal power consumption, thus posing no risk to the battery of your vehicle.
No throttle loss
Fuel Saver actually enhances throttle response by adjusting various parameters within the car's system. This allows the vehicle to maintain or even increase torque output while simultaneously reducing fuel consumption.
It doesn't affect your Engine
Our product operates within the bounds of the engine's tolerance and does not make any permanent changes to the engine control unit. Upon disconnection of Fuel Save Pro, the original factory settings are restored.
AI Adaptable Configuration
Following installation, Fuel Save Pro requires approximately 150 miles of operation in order to become familiar with the characteristics and driving style of your vehicle, thereby allowing it to optimize fuel efficiency without sacrificing throttle response.
100% Compatibility
Fuel Save Pro is designed to interface directly with your vehicle's engine control unit via the OBD-II port, which is standard on all vehicles manufactured in the United States since 1996. As such, any car produced after 1996 should be compatible with Fuel Save Pro.
Improved Performance
The Fuel Save Pro device improves the overall performance of your car through the modification of various engine control unit settings, including boost pressure, injection timings, and fuel injection. These adjustments result in a more efficient system that conserves fuel while preserving the other dynamic features of your vehicle.
It doesn't affect your Engine
Our product operates within the bounds of the engine's tolerance and does not make any permanent changes to the engine control unit. Upon disconnection of Fuel Save Pro, the original factory settings are restored.
No power compromises
The Fuel Saver operates with minimal power consumption, thus posing no risk to the battery of your vehicle.
No throttle loss
Fuel Saver actually enhances throttle response by adjusting various parameters within the car's system. This allows the vehicle to maintain or even increase torque output while simultaneously reducing fuel consumption.
Get our bundle discounts
Discover the perfect package that best suits your needs based on how many cars you have or if you want to make a gift for your friends or familiy. Take advantage of our exclusive offer and receive an additional 15% off when purchasing 3 or more devices. Begin your journey towards fuel efficiency and savings today!
00Days
00Hours
00Minutes
00Seconds
Get our bundle discounts
Discover the perfect package that best suits your needs based on how many cars you have or if you want to make a gift for your friends or familiy. Take advantage of our exclusive offer and receive an additional 15% off when purchasing 3 or more devices. Begin your journey towards fuel efficiency and savings today!
00Days
00Hours
00Minutes
00Seconds
Select Your Fuel Type
- Gasoline
- Diesel
4.9
(1298 reviewers)
Shipping Worldwide
100% Money Back Guarantee
100% Safe Checkout
4.9
(1298 reviewers)
Shipping Worldwide
100% Money Back Guarantee
100% Safe Checkout
COMBO SPRING 🌷 SALE UP TO 65% OFF - Don’t miss out
00Days
00Hours
00Mins
00Secs
What is Fuel Save Pro?
As the cost of gasoline and diesel has risen in recent years, people have been seeking ways to save money on fuel expenses. They have been searching for devices that can help them do this. Luckily, the search is now over! The solution to reducing fuel costs has arrived: Fuel Save Pro is a fuel-saving device that can help you cut your fuel consumption by as much as 35%. This device is suitable for use in all vehicles, as it connects to the standard OBD2 diagnostic socket found in all cars for remapping and diagnostic purposes.
After installation, the fuel-saving device will require approximately 150 miles of driving to begin automating the process of saving fuel based on the parameters of your engine and your driving style. If there are multiple drivers of a single vehicle, the device can store up to three profiles and automatically identify the driver.
Fuel Save Pro represents a modern iteration of software remapping. In the past, individuals would take their cars to a shop to update the software and increase torque/horsepower. However, this process often required replacing the engine control unit's microchip in order to modify the car's settings.
Fuel Save Pro offers a more convenient and advanced approach to this process. Thanks to technological advancements, the inconvenience of the past can be left behind. Modern solutions allow us to utilize small devices that connect to the OBD-II port to transmit diagnostic data about our cars directly to our smartphones.
Why Chose Fuel Save Pro
The Fuel Save PRO device will assist in reducing fuel consumption by remapping the car's engine control unit (ECU) , resulting in cost savings on fuel expenses.
The device will enhance the car's torque by increasing pressure, optimizing fuel pressure, adjusting injection timing, and regulating fuel quantity, resulting in improved performance of your vehicle.
After approximately 150 miles of driving, the Fuel Save Pro will automatically adapt to your driving style to ensure the self-adjustment feature is functioning optimally.
The device improves the efficiency and performance of the engine control unit by optimizing the On-Board Diagnostics (OBD2) protocols, resulting in improved overall performance of the vehicle.
Fuel Save Pro automatically detects and supports up to 4 drivers.
How to install Fuel Save Pro
Get Your Fuel Saver
Once you receive the package, begin the installation process by carefully unpacking your fuel-saving device. Once unpacked, proceed to your vehicle to install it.
01
Install The Device
The fuel saver device will be connected to the On-Board Diagnostics (OBD2) Engine Control Unit (ECU) port, located beneath the dashboard of your vehicle. This port is present in all vehicles manufactured after 1996.
02
Drive Your Car
After the device has been installed, it requires up to 1000 miles of driving in order to learn and adapt to your driving style and start optimizing your car's Engine Control Unit (ECU) to improve fuel efficiency.
03
Enjoy Fuel Save PRO
04
How to install Fuel Save Pro
Get Your Fuel Saver
Once you receive the package, begin the installation process by carefully unpacking your fuel-saving device. Once unpacked, proceed to your vehicle to install it.
01
Install The Device
The fuel saver device will be connected to the On-Board Diagnostics (OBD2) Engine Control Unit (ECU) port, located beneath the dashboard of your vehicle. This port is present in all vehicles manufactured after 1996.
02
Drive Your Car
After the device has been installed, it requires up to 1000 miles of driving in order to learn and adapt to your driving style and start optimizing your car's Engine Control Unit (ECU) to improve fuel efficiency.
03
Enjoy Fuel Save PRO
04
How to install Fuel Save Pro
Get Your Fuel Saver
Once you receive the package, begin the installation process by carefully unpacking your fuel-saving device. Once unpacked, proceed to your vehicle to install it.
01
Install The Device
The fuel saver device will be connected to the On-Board Diagnostics (OBD2) Engine Control Unit (ECU) port, located beneath the dashboard of your vehicle. This port is present in all vehicles manufactured after 1996.
02
Drive Your Car
After the device has been installed, it requires up to 1000 miles of driving in order to learn and adapt to your driving style and start optimizing your car's Engine Control Unit (ECU) to improve fuel efficiency.
03
Enjoy Fuel Save
04
How to install Fuel Save Pro
Get Your Fuel Saver
Once you receive the package, begin the installation process by carefully unpacking your fuel-saving device. Once unpacked, proceed to your vehicle to install it.
01
Install The Device
The fuel saver device will be connected to the On-Board Diagnostics (OBD2) Engine Control Unit (ECU) port, located beneath the dashboard of your vehicle. This port is present in all vehicles manufactured after 1996.
02
Drive Your Car
After the device has been installed, it requires up to 1000 miles of driving in order to learn and adapt to your driving style and start optimizing your car's Engine Control Unit (ECU) to improve fuel efficiency.
03
Enjoy Fuel Save PRO
04
What Is The OBD2 Port?
1. The On-Board Diagnostics (OBD-II) port is a standard interface found in the majority of contemporary vehicles. It enables mechanics and technicians to connect specialized diagnostic equipment to the vehicle's computer systems for the purpose of identifying and resolving issues.
2. The On-Board Diagnostics (OBD-II) port is typically situated beneath the dashboard on the driver's side of the vehicle, and is identifiable by the OBD-II symbol. It is a small, rectangular port that is typically obscured by a removable panel.
3. Apart from being utilized by mechanics and technicians, the On-Board Diagnostics (OBD-II) port also serves as the point of connection for fuel saver devices, performance chips, and other aftermarket devices that have the capability to enhance the performance of the vehicle.
4. By interfacing with the vehicle's Engine Control Unit (ECU) via the OBD-II port, these devices can modify the vehicle's fuel-to-air ratio, ignition timing and other settings, with the goal of increasing fuel efficiency, performance, and emissions.
COMBO SPRING 🌷 SALE UP TO 65% OFF - Don’t miss out
00Days
00Hours
00Mins
00Secs
Compatible With All Cars Made After 1996
The Fuel Saving device operates by accessing the Engine Control Unit (ECU) through the On-Board Diagnostics (OBD2) port, typically located under the steering wheel in vehicles manufactured after 1996. OBD2 ports are legally mandated and are present in all vehicles manufactured after 1996. The OBD2 port serves multiple purposes, in addition to remapping, it also enables the diagnostic of the vehicle.
Read testimonials from satisfied customers!
"I am extremely satisfied with my purchase of the Fuel Save PRO. I bought four of them, one for myself and three as gifts, and all of the recipients have been delighted with the product. The device performs as advertised and has exceeded my expectations. I highly recommend it to anyone looking to improve their vehicle's fuel efficiency."
Emily Williams
"I've been using the Fuel Save PRO for about a month now and I have already noticed a significant improvement in my gas mileage. I highly recommend this product to anyone looking to save money on gas!"
Michael Johnson
"I have been using the Fuel Save PRO for a few months now and I am extremely impressed with its performance. Not only has it improved my gas mileage, but it has also increased the power of my car. I highly recommend this product to anyone looking to optimize their vehicle's fuel efficiency"
Samantha Brown
"I was a bit skeptical about the Fuel Save PRO at first, but I decided to give it a try. I'm glad I did! I've seen a noticeable improvement in my car's fuel efficiency and I'm saving money on gas. I'm very pleased with my purchase."
Ethan Waters
Promotional Offer
Exclusive 10% Discount
Frequently Asked Questions
What is the procedure for installing the fuel saving device?
What are the signs that the device is on and functioning properly?
When you properly install the Fuel Save PRO device, the green LED light will turn on, indicating that the device is functioning correctly.
Would the device still function if my car runs on diesel?
Yes, Fuel Save Pro is compatible with diesel engines. It works with both diesel and gasoline engines, however, it is important to specify the type of engine when placing an order as the device for diesel engines is different from the one for gasoline engines. The Diesel Fuel Save PRO will not work with gasoline engines.
Is there a possibility of losing power or torque?
No, the OBD2 Fuel Saving device will not have any negative impact on the power of your vehicle. The device works by analyzing and adjusting the settings of the engine control unit (ECU) to optimize fuel efficiency, without compromising on the performance of the vehicle. In fact, it is possible that in some cases, the Fuel Save PRO device may even lead to an increase in torque, giving you better driving experience.
Is it possible to return the device and if yes, what is the process for doing so?
Yes, if you are not satisfied with our product, you can return it within 14 days of receiving it and receive a full refund. We have a 14-day Money Back Guarantee policy which allows you to test the product and decide if you want to keep it or return it for a refund.
Is there a warranty included with the device?
Yes, we provide a 1-year full warranty for our product. This means that if for any reason, the device stops working, we will replace it at no additional cost to you. The full warranty coverage ensures that you are protected against any manufacturing defects
Would it be possible to use the device on my new car if I sell my old one?
Yes, you can use the device with multiple cars. The device is designed to automatically detect when it is connected to a new car, and it will instantly reset to its default settings, without affecting any parameters of the new car you are using it on.
What is the estimated time of delivery for the fuel saver to reach my home?
We use USPS standard delivery method for shipping, however, occasionally due to restocking it may take up to 3 weeks for the product to reach you. We apologize for any inconvenience and kindly request you to bear with us, as we are working diligently to provide the fastest and most efficient shipping service possible.